Rotary Gear

Flow Dividers

Gear Flow Divider
Features:

  • Synchronized Operation of Multiple Cylinders or Hydraulic Motors.
  • Proportional Division of Pump Output Among Several Circuits.
  • Intensified Pressure When a Pressure Higher than Pump Capacity is Required.
  • Relief Protection on Each Flow Divider Section.
Rotary Gear
Model Number of Sections Displacement in3 Min Inlet Flow GPM Max Inlet Flow GPM Maximum Pressure PSI Inlet Port Outlet Port Cost
NPI-2R2.1S 2 .14 .86 3.43 3600 3/4-16 UNF 3/4-16 UNF $284.00
NPI-2R4.2S 2 .28 1.72 6.86 3600 7/8-14 UNF 7/8-14 UNF $284.00
NPI-2R5S 2 .30 1.90 7.70 3600 7/8-14 UNF 7/8-14 UNF $284.00
NPI-2R8.8S 2 .53 3.50 14.00 3600 7/8-14 UNF 7/8-14 UNF $284.00
NPI-4R2.1S 4 .14 1.72 6.86 3000 3/4-16 UNF 3/4-16 UNF $564.00
NPI-4R4.2S 4 .28 3.42 13.70 3000 7/8-14 UNF 7/8-14 UNF $564.00
NPI-4R6.3S 4 .39 5.03 20.00 3000 7/8-14 UNF 7/8-14 UNF $564.00
NPI-4R8.8S 4 .53 7.00 27.85 3000 7/8-14 UNF 7/8-14 UNF $564.00

* Note Reliefs set for 500 PSI.

Rotary Gear Flow Divider

"*" indicates required fields

Contact Information

This field is for validation purposes and should be left unchanged.

Contact Us
close slider